Combi Mechacal Handy S, Instruction Manual

Page: 16 / 28

Adjust shoulder harnesses heights ( Figure 4.8 )
1
2
3
Pull out shoulder harnesses from seat cushion and base seat.
Set the correct slots of shoulder harnesses through on the base seat.
Set correctly the harness shoulder heights and pull it out through relevant slots of seat cushion.
NOTE: The lowest shoulder harness insert outlet should be used for children under
6 months.
NOTE: Make sure to pull through all waist belt insert outlets(total 4 places)when
attaching the waist belt.
Detaching the seat cushion ( Figure 4.2-4.6 )
Reversing handle
NOTE: To install seat, follow the steps reverse.
2
WARNING
: Make sure the seat cushion has been correctly attached before use.
Attaching the waist belt ( Figure 4.7 )
Remove two of insert plastics buckle from the waist belt.
According to the direction of arrow instructions Pull the waist belt through the 4 slits on the
base board with the reverse side(waist belt) facing up.
Re-attach the insert plastic buckle and pull it out through relevant slots of seat cushion.
13
3 4
1
2
Remove the shoulder belts from the shoulder belt hooks.
5
6
Pull out crotch belt from seat cushion.
Release both elastic bands from backrest sides.
Pull out shoulder and waist belts from seat cushion.
Release the snaps of elastic on both sides of the cushion and unwind (one circle) from the
connections of armrest sides for detachment
.
Release front snaps and elastic bands underneath of the seat, and on both sides of seat.
Detach the snap on the seat cushion from the leg support bar
(if the leg support bar is in use)
3.4