Seat Back Assembly:
•
Place Booster Car Seat base on floor or
firm surface.
•
Holding seat back parallel to floor and with
front surface facing up, place tabs at bottom
of seat back into slots of seat base
(fig. a)
.
•
While pushing tabs at bottom of seat back
down into slots of seat base, rotate seat
back upright .
To remove seat back:
•
Place High Back Booster Car Seat on the
floor or other firm surface.
•
While holding the base down, rotate seat
back past plastic locking tabs so back is
parallel to the floor.
•
Pull tabs on lower seat back out of seat
base.
24
2
1
Seat
Back
Seat
Base
Tab
Slot
1
2
Section 9 - Assembly - continued
(fig. a)
1
2
CCS0130B CA.qxd 4/18/06 7:21 PM Page 25
