Combi EGGSHOCK User Manual Download

Page: 23 / 48

Using Each Part

①

hile pressing the back side of the baby belt

adjustment button,

②

Pull both the left and right baby belts forward to

loosen the baby belts.

※

Do not pull on the shoulder belt covers, as this will

not loosen the baby belts.

①

While

pulling up the head guard adjustment lever,

adjust the height of the head guard.

②

lease the head guard adjustment lever at the

proper position.

③

Try to move the head guard up and down to make

sure that it is secured.

Press the baby

belt adjustment

button.

②

①

Shoulder belt cover

Baby belt

adjustment

button

Strongly

pull the

baby belt.

Head guard

Raise

Lower

①

②

Head guard

adjustment

lever

Adjusting the baby shoulder belt position

will tighten or loosen the baby belt.

Do not adjust the baby shoulder belt position

once the child is restrained by the baby

belt.

WARNING

●

Summary of Contents for EGGSHOCK

















































Search results

Summary of Contents for EGGSHOCK

Reviews:

Related manuals for EGGSHOCK

Brands by name

Popular brands

Combi EGGSHOCK, User Manual

Search results

Summary of Contents for EGGSHOCK

Reviews:

Related manuals for EGGSHOCK

Brands by name

Popular brands