Combi Cradling360 ISOFIX, Instruction Manual

Page: 32 / 36

DANGER:
Do not drive when the child car
seat faces sideward. Facing sideward is
dangerous while the car is in motion.
1. Press the revolving lever which is stored under the operation
lever cover.
2. Release the lever after starting revolving. The child car seat
shall be locked and a "click" sound is heard after revolving the
child car seat.
3. Try to move the child car seat to make sure if it is firmly
secured.
* Owing to the rotation mechanism, the seat rotating part may
feel a little shaky even when it is secured.This is normal and does
not affect proper use of product.
Installing to the car
CAUTION:P
lease check the position of the
bracket and seat equipped with the ISOFIX
anchorages system according to the user's
manual of the vehicle. This product can be
used in two ways in the rearward and
forward, the attachment method is the same.
After finishing attachment to the vehicle,
please turn the seat forward and rearward to
match the weight of the child.
Diagram 14 - Installing to the car
Please plug ISOFIX anchorages system to fit onto the groove of
ISOFIX cap.
1.
①
Remove if vehicle headrest can be taken off,
（
Diagram
14.2
）
②
If the vehicle backrest can be reclined
，
please adjust the
angle of the reclining in order to make the gap as small as
possible.
2.
①
While pressing the lock release button of supporting leg,
please pull out the supporting leg until a “click” sound is heard.
②
While turning the connector handle of the body side,
③
Please pull out the connector to the left and right up to a
maximum.
（
Diagram 14.3
）
3.
①
Please plug the connector until "click" sound is heard to the
left and right of ISOFIX anchorages system,
②
Please confirm that indicator turns from “red” to “green".
(Red:Release / Green:Lock)
（
Diagram 14.4
）
INSTRUCTIONS
30