Combi Cosmo DX, Instruction Manual

Page: 6 / 10

Folding the Stroller
1. Lock both front swivel wheels.
Not locking
the swivel wheels before folding the
stroller can damage the wheels
2. Empty the basket.
3. Fold the canopy by lifting the canopy levers.
4. Remove your player from the canopy.
5. Lift and hold the folding levers up on both sides of the
handle.
6. Tilt the stroller onto its back wheels and roll it forward
and then pull it back quickly and the front guardrail will
fold inward.
7. Turn handle inward with an underhand hold to latch and
lock.
5
6
7
Canopy Lever
CAUTION
Folding levers should be operated only when folding
the stroller.
Removing/Attaching the Seat Cushion
CAUTION
If seat cushion is ripped or torn,
do not use.
Do not use the stroller without
the seat cushion.
Removing
1. Press levers down on
right and left harness
hooks to detach hooks
from buckle tongues.
2. Press buckle button
down (with Combi logo)
and detach buckle
tongues from buckle.
3. Remove shoulder pads
from harness by pulling
over harness
hooks.
Attaching
1. Attach Velcro at the bottom
of the seat pad to Velcro on
the stroller base.
2. Pull top of seat pad forward;
the seat pad can rest on the
front guard rail.
3. Insert buckle strap into slot at
the bottom back of the seat
pad.
4. Pull top of seat pad forward to
detach Velcro..
5. Pull all the harness straps
through the top and side slots in
cover.
6. Unzip zipper at the base of the
seat cover.
7. Pull bottom of seat pad upward
to detach Velcro
4. Locate zipper on the back
of the seat pad and locate
the zipper in the seat bite
of the stroller. (The boot
also has a zipper; do not
use the boot zipper to
attach the cover)
Zip seat pad to stroller.
5. Insert harness straps with
hooks and harness straps
with buckle tongues thru
slots on back of seat pad.
6. Attach Velcro on top of seat
pad to stroller.
Seat Base
Velcro
- 6 -