Combi City Savvy 2460 Series, Instruction Manual, Page: 3 / 12

- 3 -
Opening the Stroller
1. Release latch by pulling
it up. 2. Grip the handle on each side
with an underhand hold and turn
outward to open.
3. Lift up the handle and
snap the stroller away from
you. It will open and lock
automatically into position.
Attaching the Canopy
Attaching the Canopy
1. Confirm the canopy is facing in the proper direction.
2. Fully insert the canopy holder (male) to the canopy holder
(female) until a click is heard.
3. Fasten the canopy velcro together around the handle (2
places).
Removing the Canopy
Pull the velcro apart, squeeze the bottom of the canopy hold-
ers (male) and pull the canopy up from above the canopy
holder (female). This must be done on both sides of the
canopy to completely remove it.
CAUTION
Failure to fully secure the canopy holders can cause the
holders to bend. When storing the stroller by laying it
down, be sure the canopy is off the ground to prevent it
from bending.
1. Stand behind the stroller.
2. Locate the small open-
ing on each rear wheel
assembly.
3. Locate the small silver pin on each rear stroller leg.
Attaching the Rear Wheels
Attaching & Removing the Front Swivel Wheels
4. Insert the leg into the
wheel assembly until the
small silver pin locks into
the opening.
Place front swivel wheel
assembly on the swivel
shaft. The assembly is
secure when it locks onto
the shaft.
Removing the Swivel Wheels
Press in the square button
located at the bottom of the
wheel holder while pulling the
assembly off of the swivel
shaft.
Release Button