10
3
Grab the guard and
pull forward. Seat
opens.
*Product specifications are subject to change without prior notice for product improvements.
*When disposing of the product, please dispose it properly in accordance with the local legislation of waste disposal.
*The dimensions and mass of the product are for reference only.
Product Life
Material
Color
Product Weight
(Standard Specification)
External Dimensions
Maximum Load
Weight Limit
Target Age
Product Name
Product No.
7 years Please replace the product after passing the product life.
Body/Steel (Anti-Rust Treatment), ABS Plastic
Seat Pad/Synthetic Rubber
Cushion Materials/PVC Leather
Clear White
7.5KG
W286XD98(Open D280)XH1,150mm
4.6KG
W286XD98(Open D280)XH676mm
30KG
Up to 15KG
For children from 5 months to 2.5 years of age (30 months)
Combi Baby Keep Slim F62
BK-F62
Combi Baby Keep Slim W62
BK-W62
Combi Baby Keep Slim BK-W65 for Train
BK-W65
Product Specifications
4
Part Name
5
How to Use
6
Be sure to use the product correctly according to the warnings below. * Combi Baby Keep slim F62 is used in the diagram below.
Warning
Caution
Keep eyes on
child all the time
Do not leave
Do not
play with it
No Fire
1
Make sure to seat
the child by
caregiver.
2
Make sure to fold
the seat after use.
3
Combi Baby Keep Slim
Parts Replacement Procedure Manual
If any abnormality is detected during regular inspection or periodic inspection, and when the parts are replaced with new
ones. Read this replacement procedure manual thoroughly to replace them correctly.
Back Cushion Replacement Procedure
If any abnormalities in the back cushion
are found, it is recommended to pur-
chase a back cushion to replace it using
the method shown on the right.
*The seat cushion for Combi Baby Keep
Slim BK-W65 for train is different from
other models. Please check the detail
with the sales agent.
* The diagrram on the right uses "Combi
Baby Keep Slim F62.
Guard
Guard
Seat
Seat Pad
Main Body
Combi Baby Keep Slim F62
Combi Baby Keep Slim
W62/BK-W65 for train
Back Cushion
Lower Cover
Plastic Cap
Anchor bolts are not included and it must be prepared separately.
*1 Combi Baby Keep Slim F62 only
*2 The back cushion for Combi Baby Keep Slim BK-W65 is different from other models.
Accessories
*Make sure that the following parts are included:
● U-shape
Washer 3 pcs.*
1
● Tapping Screw
(5X35) 4 pcs.*
1
● Washer (5)
4 pcs.*
1
● Pack of Back Cushion
(hereafter referred to
as Back Cushion) 1 pc.
*
2
● Plastic Cap White
(hereafter, Plastic
Cap) 2 pcs
● Usage S BL-06
Japanese, English,
Chinese, Korean
(hereafter, Usage
Sticker) 1 pc.
● Guidance S BK
Japanese, English,
Chinese, Korean
(hereafter, Guidance
Sticker): 2 pcs
● Instruction Manual
Baby Keep Slim
(this manual) 1 copy
● Installation Manual
BK-F6/BK-W6 1 copy
● Failure to observe the above may result in death or serious injury to children.
Children may move unexpectedly.
Be careful not to cause accidents due to falling.
Back cushion
Back plate
Back cushion
After replacing parts, be sure to inspect
them in accordance with the contents of
"Daily Inspection" on page 4.
Warning
After replacement, use the reverse procedure to install the back cushion.
1 Insert a flat-head screwdriver into
the insertion guide and lift the back
cushion.
(There is a guide for inserting at the
center of the bottom of the back
cushion)
2 Remove the lower part of the back
cushion from the back plate, and
pull the whole back cushion toward
you to remove it from the back
plate.