Combi-Camp COUNTRY VALLEY, Instruction Book

Page: 11 / 20

11
Fitting the annex:
• The detachable side of the trailer’s
body canvas is zipped out.
• The annex cabin is zipped in.
• The poles with the accompanying
two round corners are put into
the sleeve inside the annex.
• The support poles with hook end
are put into the two holes in the
trailers steel section at the floor.
• The last two support poles can
then be placed between the roun-
ded corners and the annex floor.
• The nylon floor of the annex is
then stretched and pegged all the
way round, do not over tighten.
• Finally place the fibre glass pole
inside the ventilation flap, where
after the inner tent is fitted.
The door canopy is fitted as
follows:
The door canopy is zipped together
and the frames are attached and
fitted with guy ropes.
Extra sun canopy is fitted as
shown:
The sun canopy has 3 brass eyelets
in each end.The one fits the awning
frames spigots and is then attached
to the guy rope on each side.
The 3 legs are fitted and pegged
with the guy rope
A c c e s s o r i e s t o t h e t r a i l e r t e n t
S
u
n
c
a
n
o
p
y
a
n
d
t
e
n
t
U
K