ENU STATUS : 1-0-0
Copyright - refer to title page
Page 9
INSTALLATION GUIDE FOR RX-7W22, II2
1.5
SAFETY NOTICES AND ADMONISHMENTS
This document contains safety notices in accordance with appropriate standards. In the interests of conformity
with the territory standards for the country concerned, the equivalent territorial admonishments are also shown.
Any installation, adjustment, maintenance and repair of the equipment must only be carried out by trained,
authorized personnel. At all times, personnel must comply with any safety notices and instructions.
Specific hazards are indicated by symbol labels on or near the affected parts of the equipment. The labels
conform to international standards, are triangular in shape, and are colored black on a yellow background. An
informative text label may accompany the symbol label.
Hazard labeling is supplemented by safety notices in the appropriate equipment manual. These notices contain
additional information on the nature of the hazard and may also specify precautions.
Note: The grantee is not responsible for any changes or modifications not expressly approved by the party
responsible for compliance. Such modifications could void the
user’s authority to operate the equipment.
For compliance with the general population RF exposure limits, each individual antenna used for this
transmitter must be installed to provide a separation distance greater than
31.2cm
or more from all persons
during normal operation and must not be co-located with any other antenna for meeting RF exposure
requirements.
Warning Notices:
These draw the attention of personnel to hazards that may cause death or injury to the operator or others.
Examples of use are cases of high voltage, laser emission, toxic substances, point of high temperature, etc.
WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and
QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to
operate this device. The PS BDA can be configured as Class A
( FCC ID: PX8RXA37)
or Class B
(FCC
ID:PX8RXB37)
Signal Booster. You MUST register Class B signal boosters (as defined in 47 CFR
90.219) online at
www.fcc.gov/signal-boosters/registration. Unauthorized use may result in significant forfeiture
penalties, including penalties in excess of $100,000 for each continuing violation.
Note: The grantee is not responsible for any changes or modifications not expressly approved by the party
responsible for compliance. Such modifications could void the
user’s authority to operate the equipment.
Alert:
These draw the attention of personnel to hazards that may cause damage to the equipment. An example of
use is the case of static electricity hazard.
Caution notices may also be used in the handbook to draw attention to matters that do not constitute a risk of
causing damage to the equipment but where there is a possibility of seriously impairing its performance, e.g.
by mishandling or gross maladjustment. Warnings and Cautions within the main text do not incorporate labels
and may be in shortened form.
Disconnection of the 2 RF connectors may cause damage to the equipment when power is on
The application antenna and RF cable are not provided. FCC regulation mandate that the ERP of
type B signal boosters should not exceed 5W, this booster has a maximum programmable
composite output power of 5W(37dBm) for Downlink, 1W(30dBm) for uplink. Therefore, the gain
of the antenna should be of 0dBi or less.
