USER MANUAL FOR MBDA-200
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 10
1 GENERAL INFORMATION
The mBDA-200 Band Selective Wireless Repeater is designed for operation in 850MHz and 1900MHz
networks.Digital band-specific linear amplifier amplifies the desired BTS carriers and provides superior
out-of-band rejection. Typical units with adjustable bandwidth are programmed to specific requirements of
the network. Remote configuration and surveillance is possible through Comba’s remote control and
monitoring system, via PC or wireless modem to the OMC.
Main feature:
mBDA-200 is a high quality repeater with the following features:
Supports GSM, CDMA and WCDMA operating.
Supports multi operator configurations and up to 3 sub bands per band.
Adjustable sub band via OMT software.
Friendly and easy Web OMT interface via RJ45 connection.
Integrated network card for remote configuration, monitoring and control.
The figure below shows the enclosure.
Figure 1: mBDA-200
NOTE: RF module is slot undependent.
End of Section
