Comau Robotics Product Instruction
64
MULTICONTROL PANEL
5.
MULTICONTROL PANEL
5.1 Introduction
This area (highlighted in the figure above), alwais displayed, is dedicated to the Control
Units which
RoboShop
can connect and communicate to.
As already stated,
RoboShop
is able to connect to more than one Control Unit at
simultaneously, in the same session.
The
Multicontrol Panel
(figure above) is composed by:
–
3.1
)
–
3.2
)
–
(
3.3
).
5.2 Multicontrol Bar
This bar provides the needed commands to handle the Control Unit which can interact
with
RoboShop
. With reference to the figure above, from left to right, the following
commands are available:
–
