InteliVision 18Touch 1.0 Global Guide
14
IV18T is a fanless system – no fan cooling system is installed inside the IV18T. For proper operation, install
IV18T in a cabinet or rack with enough space around it and away from any strong source of heat. The operating
temperature range of the IV18T is from -10 to 60 °C.
IMPORTANT: Do not overtighten the screws to prevent damaging the Panel PC.
4.5 Power
Use the proper power cable. The power supply range is from a 12–30V DC. Use the proper fuse (maximum 5 A)
when powered from an onsite DC source. The max input current is 5 A at 12 V. The negative supply voltage pin
is connected to the IV18T chassis internally. Ensure correct polarity when connecting the DC power supply.
PIN
Definition
1
DC+ (Positive supply voltage)
2
DC- (Negative supply voltage)
3
GND (Ground)
Table 4.1 Description of Power connector
IMPORTANT: Do NOT connect power between pins GND and DC- (IT WILL CAUSE
UNREPAIRABLE DAMAGE OF THE DISPLAY UNIT).
Table 4.1 shows the consumption of the InteliVision 18Touch measured on the two voltage level. The values
was measured by the temperature of 20°C.
Performance (Mode)
+12 V
+30 V
S3 Mode - StandBy
0,13 A
0,11 A
Total Watts
1,56 W
3,30 W
Idle Mode
1,58 A
0,71 A
Total Watts
18,96 W
21,30 W
Full-Loading Mode
2,70 A
1,16 A
Total Watts
32,40 W
34,80 W
Table 4.2 Consumption of IV18T
