ComAp InteliVision 13Touch, Global Manual

Page: 15 / 28

InteliVision 13Touch Global Guide
15
4 Display Unit Settings
4.1 Touchscreen settings 15
4.2 On-Screen Keyboard (OSK) settings 15
6
back to Table of contents
As the operating system Windows® 10 IoT Enterprise 2019 LTSC (64bit) is installed on the IV13T, you can use
standard settings such as the screensaver (the ComAp Screensaver is preinstalled), power off the display or
the whole unit after a set period of time, etc.
Only one user, ‘User’, is predefined with no password set. You can restrict users by setting passwords and/or
creating new users with limited rights. For more details, use Windows help.
4.1 Touchscreen settings
It is possible to calibrate touch sensor using the standard Windows® 10 IoT Enterprise 2019 LTSC (64bit)
functions.
1. Navigate to Start - Control Panel - Tablet PC Settings - Calibration
2. Perform the calibration
3. Save the calibrate data
4. Done
4.2 On-Screen Keyboard (OSK) settings
The On-Screen Keyboard (OSK) is a part of Windows® 10 IoT Enterprise 2019 LTSC (64bit) operating system.
OSK is pined to the Windows taskbar by default.
6
back to Display Unit Settings