InteliNano-NT Plus, SW version 2.0.1.x,
©ComAp – July 2015
29
6
Controller Settings
Setup mode
6.1
C
AUTION
!
Controller must be in manual mode before you can enter the controller’s setup mode. Use button
Auto
for switching between
Auto
and
Manual
mode. Green LED above button
Auto
is turned off when the
controller is in Manual mode.
If you have not configured custom initialization (init) screen then press and hold
Stop
button, then
briefly press
▲
button then
Auto
press and hold
+ press
hold
+ press
Figure 6.1
ENTRY TO SETUP MODE
(
WITHOUT CUSTOM SCREEN
)
If you have already created your own init screen then press and hold
Stop
button and then press
briefly press
▲
, the custom init screen will appear, keep holding the
Stop
button. Then press
▼
to
switch LCD to default init screen and then press
Auto
).
