ComAp InteliNano MRS 3, Operator'S Manual

Page: 8 / 11

InteliNano
NT MRS 3 Operator Guide,
©ComAp – July 2017
8
Figure 3.2
3.1 Events
Every event listed in table below is saved in history with running hours stamp see Figure 3.3 .
Figure 3.3
event
– Power On
3.2 Warnings
3.2.1 Active warning
When a warning occurs, O04 Alarm and O15 Common Warning outputs will close and the red LED
above STOP button will blink. Warning symbol will blink in the upper-right corner of the LCD and the
proper warning symbol will be displayed in the history with running hours stamp.
Active warning can’t
be confirmed.
Figure 3.4
active warning
– Low Battery