InteliLite4 AMF20 Global Guide
11
2 System overview
2.3 Configurability and monitoring
2.1 General description
InteliLite 4 family controller are a comprehensive Gen-set controllers for single Gen-set operating in prime
power source (MRS) or back-up (AMF) applications. A modular construction allows upgrades to different
levels of complexity in order to provide the best solution for various customer applications.
2.1.1 The key features of InteliLite 4
Easy-to-use operation and installation. The factory default configuration covers most applications.
Various customizations are possible thanks to its configurability
Excellent remote communication capabilities
High level of support for EFI engines (most world producers)
High reliability
2.2 True RMS measurement
This controller measures AC values based on True RMS principle. This principle corresponds exactly to the
physical definition of alternating voltage effective values. Under normal circumstances the mains voltage
should have a pure sinusoidal waveform. However some nonlinear elements connected to the mains produce
harmonic waveforms with frequencies of multiples of the basic mains frequency and this may result in
deformation of the voltage waveforms. The True RMS measurement gives accurate readings of effective
values not only for pure sinusoidal waveforms, but also for deformed waveforms.
2.3 Configurability and monitoring
One of the key features of the controller is the system's high level of adaptability to the needs of each
individual application and wide possibilities for monitoring. This can be achieved by configuring and using the
powerful PC/mobile tools.
2.3.1 Supported configuration and monitoring tools
InteliConfig – complete configuration and single or multiple Gen-sets monitoring
WebSupervisor – web-based system for monitoring and controlling
WebSupervisor mobile – supporting application for smart-phones
WinScope 1000 – special graphical monitoring software
InteliSCADA – monitoring and management of ComAp devices
