ComAp IM-NT, Reference Manual

Page: 187 / 328

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf,
©ComAp – June 2013
187
12.2.11.24 Setpoint: ExtValue4HiLim
Group Force value
Range [units] ExtValue4LoLim .. 32000 [X]
Related FW 3.0
Description
This setpoint adjusts the high limit of the value of ExtValue 4 if the value is
lowered/raised by the binary inputs ExtValue4 up and ExtValue4 down . The
ExtValue 4 is never raised over this limit.
N
OTE
:
This limit is not taken into account if the value ExtValue 4 is written remotely
from a terminal using the appropriate command ExtValue #n .
12.2.11.25 Setpoint: ExtValue1 rate
Group Force value
Range [units] 1 .. 10000 [X/s]
Related FW 3.0
Force value
possible YES
Description This setpoint adjusts the rate pre second at which the ExtValue 1 is beeing
changed while the input ExtValue1 up or ExtValue1 down is active.
12.2.11.26 Setpoint: ExtValue2 rate
Group Force value
Range [units] 1 .. 10000 [X/s]
Related FW 3.0
Force value
possible YES
Description This setpoint adjusts the rate pre second at which the ExtValue 2 is beeing
changed while the input ExtValue2 up or ExtValue2 down is active.
12.2.11.27 Setpoint: ExtValue3 rate
Group Force value