ComAp IGL-RA15, Global Manual

Page: 15 / 15

4 Technical data
Voltage
supply
8-36 VDC
Consumption
0.35-0.1A (+1Amax horn output)
depends on supply voltage
Power supply
Operating
temperature
-20 ˚C to +70 ˚C
Storage
temperature
-30 ˚C to +80 ˚C
Protection
front panel
IP65
Humidity 85%
Standard
conformity
Low Voltage
Directive
EN 61010-1:95 +A1:97
Electro-
magnetic
Compatibility
EN 50081-1:94, EN 50081-2:96
EN 50082-1:99, EN 50082-2:97
Vibration
5-25 Hz, ± 1,6 mm
25-100 Hz, a = 4 g
Shocks a=200 m/s
2
Heat
radiation
2 W
Operating conditions
Dimensions 180×120×55mm
Weight 950g
Dimensions and weight
Maximum
current
1.0 A
Maximum
switching
voltage
36 VDC
Horn output
Galvanic
separated
Maximal
CAN bus
length
200m
Speed 250kBd
Nominal
impedance
120Ω
Cable type twisted pair (shielded)
CAN bus interface
Following dynamic cable parameters are important
especially for maximal 200 meters CAN bus length:
Nominal
Velocity of
Propagation
min. 75% (max. 4.4 ns/m)
Wire
crosscut
min.0.25 mm
2
Maximal
attenuation
(at 1 MHz)
2 dB / 100m
BELDEN (see www.belden.com):
3082A DeviceBus for Allen-Bradley
DeviceNet
3083A DeviceBus for Allen-Bradley
DeviceNet
3086A DeviceBus for Honeywell SDS
3087A DeviceBus for Honeywell SDS
3084A DeviceBus for Allen-Bradley
DeviceNet
3085A DeviceBus for Allen-Bradley
DeviceNet
3105A Paired EIA Industrial RS485 cable
LAPP CABLE (see www.lappcable.com):
Unitronic BUS DeviceNet Trunk Cable
Unitronic BUS DeviceNet Drop Cable
Unitronic BUS CAN
Unitronic-FD BUS P CAN UL/CSA
Recommended Industrial Automation &
Process Control Cables
6
back to Table of contents
IGL-RA15 2.0.0 Global Guide
15