IGS-NT-BC, SW Version 1.2.0,
©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
148
Range [units]
[-]
Related FW
3.0
Description
The setpoint is used to specify the alert type of the active calls - channel 4. See
the chapter
Alarm messaging
for more details.
Setpoint: AcallCH4-Addr
Group
Act. calls/SMS
Range [units]
[-]
Related FW
3.0
Description
The setpoint is used to specify the recipient address for the active calls - channel
4. The content of the address must correspond to the selected alert type (e.g. it
must contain e-mail address if the alert type is e-mail). See the chapter
Alarm
messaging
for more details.
Setpoint: AcallCH5-Type
Group
Act. calls/SMS
Range [units]
[-]
Related FW
3.0
Description
The setpoint is used to specify the alert type of the active calls - channel 5. See
the chapter
Alarm messaging
for more details.
Setpoint: AcallCH5-Addr
Group
Act. calls/SMS
Range [units]
[-]
Related FW
3.0
Description
The setpoint is used to specify the recipient address for the active calls - channel
5. The content of the address must correspond to the selected alert type (e.g. it
must contain e-mail address if the alert type is e-mail). See the chapter
Alarm
messaging
for more details.
Setpoint: NumberRings AA
Group
Act. calls/SMS
Range [units]
1 .. 30 [-]
Related FW
3.0
Description
This setpoint is used to adjust the number of rings after which the modem, which
is attached to he controller, answers the incoming call.
