ComAp IB-Lite, Quick Manual

Page: 4 / 4

IB-Lite Quick Guide
IB-Lite Quick Guide ©ComAp – December 2011 IB-Lite-Quick Guide 12-2011.pdf
ComAp, spol. s r. o.
Kundratka 2359/17
180 00 Prague 8
Czech Republic
L
ITE
E
DIT
: A
IR
G
ATE
C
ONNECTION
W
EB
S
UPERVISOR
: A
IR
G
ATE
C
ONNECTION
Tel.: +420 246 012 111
Fax: +420 246 316 647
E-mail:
URL:
info@comap.cz
http://www.comap.cz
Page 4 of 4
Ad C) Connection of IB-Lite to Ethernet by using of static IP or to Internet by using of public static IP
N
OTE
:
Use this possibility when your IT department has a Static Ethernet IP at your disposal or when the Static
Public IP from your internet provider is available.
4. Turn on the controller.
5. Setup “Comms Settings” directly on the controller:
- Press button. Choose “Comms Settings” by using of arrows and press .
- Setup items of “IBLite IP Addr”, “IBLite NetMask” and “IBLite GateIP” according to
n from your IT department (internal network) or internet provider (public network). informatio
“IBLite DHCP” and “AirGate” has to be DISABLED.
N
OTE
:
“Comms Settings” of controller can be as well changed by using of LiteEdit software via
IL-NT RS232, IL-NT RS232-485 or IL-NT S-USB communication modules.
W
ARNING
:
Disconnect power source from the controller before exchanging the communication module!
6. Connec
iMonitor software or just a web browser with your
WebSupervisor account ( http://websupervisor.comap.cz
t the IB-Lite to the router via UTP cable.
7. For connection with controller use LiteEdit or Intel
) or simply embedded SCADA WebServer
with putting of public IP Address (“IBLite IP Addr”) into the address bar.
N
OTE
:
More detailed information about IB-Lite you can find in IB-Lite Reference Guide available on ComAp website .