IB-Lite Quick Guide
IB-Lite Quick Guide
©ComAp – December 2011
IB-Lite-Quick Guide 12-2011.pdf
ComAp, spol. s r. o.
Kundratka 2359/17
180 00 Prague 8
Czech Republic
Short guide how to start using of IB-Lite module
RJ45
Ethernet
“Restore default settings”
jumper (
D
)
1. What will you need?
A.
One of supported ComAp controllers:
,
and their clones (more at
N
OTE
:
This document relates to controllers able to use Communication Settings directly
from the controller or relevant PC Software (LiteEdit, InteliMonitor).
IL-NT - SW 1.6
*
or WSUP 1.0 and higher
InteliPro
- SW 1.0 and higher
IC-NT - SW 1.3 and higher
ID-FLX Lite
- SW 1.1 and higher
MC-NT - SW 1.1 and higher
ID-Lite
- SW 2.0 and higher
IA-NT - N/A
Mentioned controllers with another SW are able to use IB-Lite communication
module too. Only settings need to be done by using of web browser (more in
).
* Available in IB-Lite 1.7 firmware
B.
UTP cable (RJ45), other network accessories (router etc.)
2. Turn off the controller (disconnect the controller from power source). Plug the IB-Lite module into the
supported controller from the back side (see the picture bellow).
P
LUGGING IN OF THE
IB-L
ITE COMMUNICATION MODULE
Tel.: +420 246 012 111
Fax: +420 246 316 647
E-mail:
URL:
http://www.comap.cz
Page 1 of 4
