CM2-4G-GPS Quick Guide
5
Getting started with active e-mails
The built-in e-mail client is
capable to operate with most SMTP servers
, including those requiring secure
sockets and/or user login.
Preferred procedure
1. Obtain a suitable SMTP server. There are following options:
a. Use a SMTP server located inside the infrastructure where the module is to be used and ask IT
personal for the information about it and about appropriate settings.
b. Create an account in some public e-mail service like smtp2go.com
2. Adjust the setpoints as follows:
a. SMTP Server Address = < selected smtp server>:<port> (ilustration example:
smtp.company.net:465
)
b. SMTP Sender Address = adjust a sender address here, which
must
match the selected server policy
)
c. SMTP User Name = <account name> or blank if authentication is not required by the server
d. SMTP Password = <account password> or blank if authentication is not required by the server
e. SMTP Encryption = <according to the server requirements>
Optional procedure
If your controller and module are connected to AirGate you may also use AirGate SMTP service. Using this
option is possible only if the controller and module are connected to AirGate.
Note:
It may take up to 10 minutes after the controller/module have connected to AirGate till the service
becomes available.
1. Adjust the setpoints as follows:
a. SMTP Server Address = mail.airgate.link
b. SMTP Sender Address = adjust some e-mail address here, it
must
be from an
existing domain
and
the domain must allow sending e-mails from 3rd party SMTP servers.
c. SMTP User Name = blank
d. SMTP Password = blank
e. SMTP Encryption = NONE
Firmware upgrade
Download the newest FW of module from ComAp website (in form of PSI file or installation package)
Instal package to computer or open PSI to instal it into InteliConfig
Plug the module into the controller and power the controller on.
Open a connection with controller via InteliConfig
Go the menu Tools -> Firmware upgrade, select the Plug-in modules tab and select the appropriate
firmware you want to program into the module (in InteliConfig).
Press the OK button to start upgrade of firmware.
