FW-C2800 User Manual
6
Version: FW-C2800-20100316
3.1.4. Make an IDD call
The operation is the same as above, but the inputted number has to be prefixed with the country
code and area code.
Note: press “0” and hold it for a second then the LCD will display the IDD call icon “+”.
3.2. Placing a Payment Phone Call on Controller
3.2.1. Prepaid
Connect the controller with the phone and activate the controller.
Press
【
F2: Prepaid
】
on the controller; key in prepaid value with the numeric keys and then
Press
【
F5: Finish
】
to confirm the value input.
The
LCD of the phone will display “You can dial your first call”.
Pick up the handset or press the Hand Free key.
Input the phone number and press then Dial key to dial out the number.
After the call, t
he LCD will display the Call Bill. Press “No call” and the user could print or view
the details; or press “Other call “to initiate a new call.
3.2.2. Postpaid
Connect the controller with the phone and activate the controller.
Press
【
F1: Postpaid
】
on the controller.
The LCD of the phone will display “You can dial your first call”.
Pick up the handset or press the Hand Free key.
Input the phone number and press then Dial key to dial out the number.
After the call, the LCD will display the Call Bill. Pres
s “No call” and the user could print or view
the details; or press “Other call “ to initiate a new call.
See
controller activation at
4.3.1.1 Call Metering Mode
See
controller operation at Remote Display Unit/ Controller Brief User Guide.