User Manual
co
M
.sat
PCI GSM
Created on: 18.01.2010
Page | 7
Please observe security references as per DIN 34!
User manual PCI-GSM V1.1
5.
... until about 1,5 mm of the con-
tacts can still be seen.
6.
Insert the board back into the PCI slot and fix it with the screws. Close the
case and re-plug the network cable.
4. Getting the PCI Board into operation
To start operation of the coM.sat PCI GSM Board first you will have to insert the
SIM-cards and connect the antenna.
1.
With a pen or a small screwdriver
press onto the yellow button to
eject the SIM-cardholder.
2.
After ejection of the cardholder,
insert the SIM-cards.
Remark: The SIM-cards do only fit into the cardholer in one singular
position!
3.
Replace the cardholder with the cards into its case. The SIM-cards have to
be face down when doing this. Make sure the cardholder is correctly posi-
tioned within its track.
4.
Connect the antenna(s) to the an-
tenna connection (s) by initially
docking in the antenna and then
screwing it into a fixed position. A
screw driver will not be necessary
for this procedure.
