COM-power corporation CDN-T8SE, Instruction Manual

Page: 9 / 12

Page 9 of 12
INSTRUCTION MANUAL
Shielded T ‐ series Coupling/Decoupling Networks (CDN)
19121 El Toro Rd
●
Silverado, California 92676
●
(949) 459 ‐ 9600
●
com ‐ power.com
REV021215
6.1.1
CDN Selection
The IEC ‐ 61000 ‐ 4 ‐ 6 requires that an appropriate coupling decoupling networks (CDN) with
defined common mode impedance be used for coupling and/or decoupling purposes on any
type of power or I/O interface for which a CDN is suitable and available. The shielded T series
CDNs are only appropriate for signal lines (ethernet). Other types CDNs available from Com ‐
Power Corporation are given below.
Model Specifications
CDN ‐ M125E Single line, 25 Amp, 150 kHz ‐ 230 MHz
CDN ‐ M225E Single line + Neutral, 25 Amp, 150 kHz ‐ 230 MHz
CDN ‐ M325E Single line + Neutral + Earth, 25 Amp, 150 kHz ‐ 230 MHz
CDN ‐ M425E Three phase + Neutral, 25 Amp, 150 kHz ‐ 230 MHz
CDN ‐ M525E Three phase + Earth, 25 Amp, 150 kHz ‐ 230 MHz
CDN ‐ C50E 50 Ohm coax cable, 150 kHz ‐ 230 MHz
CDN ‐ C75E 75 Ohm coax cable, 150 kHz ‐ 230 MHz
CDN ‐ S1 Shielded cable with 1 conductor,150 kHz ‐ 80 MHz
CDN ‐ S2 Shielded cable with 2 conductors,150 kHz ‐ 80 MHz
CDN ‐ S4 Shielded cable with 4 conductors,150 kHz ‐ 80 MHz
CDN ‐ S9 Shielded cable with 9 conductors,150 kHz ‐ 80 MHz
CDN ‐ S15 Shielded cable with 15 conductors,150 kHz ‐ 80 MHz
CDN ‐ S25 Shielded cable with 25 conductors,150 kHz ‐ 80 MHz
CDN ‐ AF2E Unshielded cable with 2 conductors,150 kHz ‐ 230 MHz
CDN ‐ AF4E Unshielded cable with 4 conductors,150 kHz ‐ 230 MHz
CDN ‐ AF8E Unshielded cable with 8 conductors,150 kHz ‐ 230 MHz
CDN ‐ T2E Unshielded cable with 2 conductors balanced pairs,150 kHz ‐ 230 MHz
CDN ‐ T4E Unshielded cable with 4 conductors balanced pairs,150 kHz ‐ 230 MHz
CDN ‐ T8E Unshielded cable with 8 conductors balance pairs,150 kHz ‐ 230 MHz