Page 7 of 23
INSTRUCTION MANUAL
AL-130R
ACTIVE LOOP ANTENNA
1912 1 E l T o ro R d
●
Si l vera do, Ca lifo rni a 9 26 76
●
(9 49) 459 -96 00
●
co m-p o wer. com
REV112216
3.3 Product
Safety
Information
3.3.1
Product Hazard Symbols Definitions
The hazard symbols appearing on the product exterior are defined below.
The yellow triangle with an exclamation mark indicates the presence of
important operating and/or maintenance (servicing) instructions in the
literature accompanying the product.
3.3.2
Product Warning/Caution Statements
WARNING:
TO PREVENT ELECTRIC SHOCK, DO NOT OPEN COVER. SERVICING ONLY BY
QUALIFIED PERSONNEL. NO USER SERVICEABLE PARTS INSIDE
CAUTION:
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH THE
SAME TYPE AND RATING OF FUSE.
3.3.3
General Safety Instructions
The following safety instructions have been included in compliance with safety standard
regulations. Please read them carefully.
•
READ AND RETAIN INSTRUCTIONS
- Read all safety and operating instructions before
operating the instrument. Retain all instructions for future reference.
•
HEED WARNINGS
- Adhere to all warnings on the instrument and operating instructions.
•
FOLLOW INSTRUCTIONS
- Follow all operating and use instructions.
•
WATER AND MOISTURE
- Do not use the instrument near water.
•
WALL OR CEILING MOUNTING
- Do not mount the instrument on a wall or ceiling.
•
HEAT
- The instrument should be situated away from heat sources such as heat registers or
other instruments which produce heat.
•
POWER SOURCES
- Connect the instrument only to the type of power source described in
the operating instructions or as marked on the instrument.
•
POWER CORD PROTECTION
- Place power supply cords so that they are not likely to be
walked on or pinched by items placed on them or against them.
•
CLEANING
– Clean the instrument only as recommended by the manufacturer.
•
DEFECTS AND ABNORMAL STRESS
- Whenever it is likely that the normal operation has been
impaired, make the equipment inoperable and secure it against further operation.
•
DAMAGE REQUIRING SERVICE
- Instrument should be serviced by qualified personnel when:
9
The power supply cord or the plug has been damaged.
9
Objects have fallen or liquid has been spilled into the instrument.
9
The instrument has been exposed to rain.
9
The instrument does not appear to operate normally.
9
The instrument has been dropped, or the enclosure has been damaged.
•
SITTING OR CLIMBING
- Do not sit or climb upon the instrument or use it as a step or ladder.
