© 2019 Columbus McKinnon Corporation. All Rights Reserved
5
LHH-B P/N 192063327
REV. AA March 2019
5.
Take off the hand wheel.
5a.
(1.5t
– 5t capacity only)
Detach snap rings that retain the Pawls in place,
then remove the Pawls. Attach Pawls for Load
Limiter and snap rings.
6.
Insert the Load Limiter.
7.
Add one flat washer (exception: add two flat
washers for 3t unit) and secure assembly with
castle nut.
8.
Tighten castle nut completely first, then loosen
by turning counterclockwise 60°-90° (enough to
insert split/cotter pin).
9.
Bend the tip of the Split/Cotter Pin to secure the
castle nut.
