Starting from 30/07/2007
Columbia
10
7. CHECKING THE WELDING
A visual inspection of the sealing area is sufficient to check the sealing quality. For inspection, you can also peal back
the weld strap and examine the weld:
§
Correct sealing
: The sealing must be welded across the entire width of the strap and for a length of approximately
25 mm. Small quantities of plastic material may escape from the welding area. (pict. 12 ).
12
§
Short welding time: the plastic straps are not welded across their entire width. If the sealing is not sufficient,
discard the strap, increase the welding time and repeat the process. (pict. 13 ).
13
§
Long welding time: the material is overheated and escapes from the sides of the welding area. If the sealing is
inadequate, discard the strap, reduce the welding time and repeat the process. (pict. 14 ).
14
FEEDWHEEL HIGHT ADJUSTMENT
Loosen the nut code 516002250 with socket wrench for size 10. ( 1 ).
Regulate the height of the feedwheel unfasten the screw code 515009790 with allen wrench for size 2.5 ( 2 ).
Adjusted the height of the feedwheel fasten the nut code 516002250 with a socket wrench size 10. ( 1 ).
15
