COLUMBIA VAC KC100, Manual

Page: 14 / 46

14
•
EN
The tank
(9)
can be completely removed from the device, after pulling out the pump -
Fig. 5.
clean the casing with a soft, damp, cloth.
do not use chemical solvents (e.g. benzene, alcohol, gasoline) as this could damage the surface or
deform the entire casing.
do not immerse the device in water or any other liquid.
do not spray the device with water.
FiLTER
The filter
(7)
should be checked regularly. To do this, first remove the screws securing the filter cover
(8) and then remove the filter cartridge (7) .
If a replacement is necessary, remove the used filter from the cartridge and replace it with a new one.
Note
Do not turn the unit on without a correctly installed filter (7).
THE END OF THE DEViCE’S OPERaTiNG CYCLE
Turn the device off.
Empty the tank
(9) .
Remove the filter
(7)
, and, after thorough drying, install it in the device.
Wrap the device in a plastic bag and store it in a dry place.