Hydrotek Automatic Faucets
4000C-SD-LR Series
Deck Mounted / Mixing / Manual On & Off with Temperature Adjust
Meets ANSI/ASME A112.18.1 M-1989
Operation:
1.
A continuous, invisible beam is emitted from the sensor.
2.
The faucet is activated by placing hands under the spout within the effective
range of the beam. Water starts to flow immediately for as long as the user’s
hands remain in the sensor range.
3.
When hands are removed, the water flow stops. The sensor will automatically
reset and be ready for the next user.
4.
In the battery powered version, a flashing red light will indicate a low battery
condition.
5.
Use the faucet handle for temperature adjustment and manual on/off.
Specifications:
Faucet Construction:
- Solid brass, chrome plated
Control Circuit:
- Solid state, AC or battery, switchable
Auto. Time-out:
- Preset at 20 seconds and adjustable
to 10, 30, or 60 seconds
Line Purge (request only):
- 2 minute run every 12 hours or 24 hours
Scrub Mode Delay (request only):
- 60, 120, 180 seconds
Sensor Range:
- Preset and adjustable
Shut-off Delay:
- Presets and adjustable from 1-8 seconds
Control Cable:
- Armored, vandal resistant
Solenoid Valve:
- 6V DC, normally closed
- Wattage: 0.4W (idle), 5W (in use)
- Operating Pressure: 5 psi to 125 psi
Flow Control:
- 2.5 GPM Rose Spray for scrub sink
- 2.0 GPM Laminar (Optional)
AC Mode
Power Adapter
Standard Plug-in:
- Input AC 120V 60 Hz or 220V
(UL/CSA)
- Output DC 12V, 0.8A/Class 2
Power Cable:
- Armored, vandal resistant
Optional Multi-Unit Adapter:
- Serves up to 8 faucets
(UL/CSA)
- Input AC 120V, Output DC 12V, 3A
Battery Mode
Battery Powered Models:
- (4) AA Alkaline Batteries
Battery Service Life:
- 400,000 on/off cycles, up to 4 years
Package Includes:
(1) Faucet with electronic sensor
(1) Control box
(1) 12V DC plug-in power adaptor (H-4000C, -DC, -LR and -LRDC only)
(1) In-line filter with clean-out trap
(1) Flex, S.S. supply tube, 3/8”
(1) 6” Gooseneck Spout
(1) Mounting hardware
(1) 2.0 GPM Flow Control
(4) AA Alkaline batteries (HB-4000C, -DC, -LR, -LRDC only)
(1) Battery holder (HB-4000C, -DC, -LR, -LRDC only)
Dimensions:
Base Width (Outside Measurement)
2-1/2”
Base Depth
2”
Faucet Height (Aerator to Base)
10-1/4”
Faucet Height Overall
15-1/4 ”
Depth (Center of Aerator to Center of Faucet Base) 5-1/8”
Mounting Bolt Length
2-1/2”
Mounting Bolt Pattern
Single-hole mount
Optional Variations and Accessories
•
1.5 GPM Soft-Flow Aerator; 0.35, 0.5, 2.2 GPM Laminar Flow
•
4” or 8” Centerset Cover Plate
•
HC-010 Multi-Unit Voltage Adapter (AC Powered Only) - 8 units
•
HC-0104 Multi-Unit Voltage Adapter (AC Powered Only) - 4 units
•
HBL-04 Thermostatic Mixing Valve with Checks
HYDROTEK INTERNATIONAL, INC.
5055 Forsyth Commerce Rd., Ste 124
Orlando, FL 32807
800.922.9883 (Phone)
866.670.5580 (Fax)
www.hydrotekintl.com
8” (203 mm)
15-1/4” (387 mm)
10-1/4” (260 mm)
6-1/2” (165 mm)
19” (483
mm) MAX
2-5/8”
(67 mm)
H-4000C-SD-LR
(AC Powered)
Only
