background image

2

COLUMBIA SPECIFICATIONS 

1622 Browning   Irvine, CA   92606-4809   Phone: 949.474.0777   Toll Free: 800.626.2117   Fax: 949.474.1191   

www.columbiasinks.com

   email: info@

columbiasinks.com

©2019 Columbia Products

HANDS-FREE FLOOR MOUNTED WASH STATIONS

Tools Required

 Tape Measure
 Adjustable Wrench
 Drill Motor and Drill Bits
 Pipe Wrench
 Level
 Safety Glasses
 Screw Drivers: 1 Phillips & 1 Standard
 Pencil
 Socket Wrench

Installation Instructions

Step 1

 

1. 2 and 3-Person models require leg assembly. 
2. Place wash station sink on leg assembly and secure with hardware (provided).
3. Establish sink location.
4. Mark the floor where the four holes are at the base as shown in illustration A. 
5. Drill holes as required for mounting hardware. (Hardware not included). 

Step 2

 

1. Install spout assembly to the sink. 
2. Install elbow fitting (provided) to the spout assembly. 
3. Connect one side of the supply line (provided) to the spout assembly. 
4. Install strainer assembly. 

Step 3

 

1. Install mixing check valve and elbow fitting to valve.
2. Install foot pedal valves under the leg assembly cross bar if not mounted already. 
3. Attach connecting tube from the spout to the foot pedal valve. 

Step 4

 

1. Secure wash station to floor.
2. Connect waste line to strainer assembly. 
3. Connect water supplies (hot and cold) to the mixing check valve. 

Step 5

 

1.  Remove aerator from the spout assembly and flush water line by pressing pedal for 30 

seconds. 

2. Check connections for leaks. Replace aerator onto the spout assembly.
3. Seal gap between bowl and leg assembly as shown in illustration B. 
4.  When mounting against wall, we recommend sealing top of backsplash to wall as shown in 

illustration C.

Parts List

 (1) Floor mount wash station
 (1) Leg assembly set
 (6) Washers and nuts for connection sink to leg assembly set
 (4) Single foot pedal valve (bottom mount) with 4 nuts 
 (4) Swivel gooseneck spout with aerator 
 (4) Connecting tube for valve to spout connection 
 (8) Fittings, brass, 0.375” male compression and 0.375” male NPT 
 (4) Mixing check valve 
 (2) Strainer assembly with basket

WARNING:

 This product can expose you to chemicals including Chromium (hexavalent compounds), 

Lead, and Phthalates (DEHP) which are known to the State of California to cause cancer and birth defects 
or other reproductive harm. For more information go to 

www.P65Warnings.ca.gov

.

NOTE

Lead content originates from Brass components in valves and faucets and is certified under 

NSF/ANSI 372 as containing less than 0.25% lead in wetted surfaces.

Notice for California Consumers

Illustration A

Illustration B

Illustration C

Reviews: