Coltri Sub CRUISER OCTOPUS, Use And Maintenance Manual

Page: 33 / 44

ENGLISH
33 - 48
POLARIS
SINTHESIS
CRUISER OCTOPUS
- Do not leave your regulator exposed to direct sunlight when possible
- Do not use the regulator first stage as a handle to carry the cylinder.
- After every dive quickly remove the regulator from the cylinder to
preserve it from any shock damage.
- In every case always handle your with care.
Cleaning:
COLTRI SUB recommends the use of cleaning/desinfection product (cold
process) for the destruction of the germs on regulators.
Storage:
After the regulator has been rinsed and dried, store it if possible by
hanging it by the first stage yoke, away from heat and direct sunlight.
When storing it for an extended period of time, select a dry cool, clean
place, and apply to the hose and first stage silicone spray approved for
use with diving equipment.
Check-up and repairs:
Regulator will provide optimum performance only if used properly and
inspected regularly. Normal wear parts such as diaphragm, seat, exhaust
valve, o’rings, mouthpiece must be inspected and changed regularly.
Every year, preferably before the start of the diving season, the regulator
must be taken to a COLTRI SUB authorized technician for annual service.
CAUTION
IMPORTANT: After the dive your regulator should be cleaned with
fresh water. Before rinsing your first stage, make sure the dust cap
is in place.