1.
4.
2.
5.
3.
1. Consult a qualified technician to install to water supply if applicable.
2. Connect the foot control pedal cable to the foot control pedal and to the rear of the unit.
3. Connect the power cord to the unit and the AC power outlet.
6.
See Section 4 in the
owner’s guide for Operation
Instructions.
4. Fill the medicament bottle with water or medicament solution. Screw the bottle connector cap onto the bottle and push it onto
the connector on the left side of the unit. When removing the bottle, press first the depressurization button beside the connector.
5. Gently slide a handpiece grip onto the scaler handpiece. Place the scaler tip in the torque wrench and use the torque wrench to
screw the scaler tip clockwise onto the scaler handpiece. Tighten until the resistance causes the torque wrench to begin to slip.
NOTE! Before installing and using the device please read the owner’s guide.
6.b.
Installation
P/
N
20
0
0
4
49
9A
coltene.com
Coltène/Whaledent Inc.
235 Ascot Parkway
Cuyahoga Falls, OH 44223 / USA
Tel. USA & 1 800 221 3046
+ 1 330 916 8800
Fax +1 330 645 8704
[email protected]
Coltène/Whaledent AG
Feldwiesenstrasse 20
9450 Altstätten / Switzerland
Tel. +41 (0)71 757 53 00
Fax +41 (0)71 757 53 01
[email protected]
Coltène/Whaledent GmbH + Co. KG
Raiffeissenstrasse 30
89129 Langenau / Germany
Tel. +49 (0)7345 805 0
Fax +49 (0)7345 805 201
[email protected]
