Colortrac M25e, Service Manual, Page: 88 / 129

M Series Service Manual
Page 88 of 129
14.9
Drive Roller Timing Belt
14.9.1 Safety Precautions

Ensure that the power and USB cables are completely disconnected from the scanner unit.

Ensure the scanner is positioned on a stable maintenance platform.
14.9.2 Tools

M7 Nutspinner.
14.9.3 Associated Part Numbers

51H002 : Drive Roller Timing Belt (part of 10H030 : Timing Belts Kit)
14.9.4 Important Information

For all photos, please refer to chapter “7 Photos Information” on page 9.
14.9.5 Procedure
1. To remove the Drive Roller
Timing Belt, first loosen the
Main Timing Belt from the
Rear Drive Roller Pulley, as
described
in chapter “14.8
Main Timing Belt
” page 84.
2. Loosen the Drive Roller
Timing Belt Tension Bar.
Making sure not to release
the nut fully from the bolt.
Slide the Tension Bar down
out of the way.