M Series Service Manual
Page 118 of 129
15.9
Auto-stitch
15.9.1 Associated Part Numbers
10H028A : Calibration and Auto-stitch Target
1. Follow instructions to the
Second Level Utilities in
chapter “15.5 Second
Level Utilities
2. Insert the Calibration Target
so that the black section is
in first, and face up.
NOTE: It is necessary to remove the
Magnetic Paper Guide so the target can fit
centrally in the scanner.
3. Click
‘Auto-stitch’ button to
start the process.
4.
Click ‘OK’ to except the
message.