User Manual
IV.
Parameter Configuration
First of all, please make sure the software in
i Series Mode
before setting.
Click the “Setting” > “Software Setting” to enter the Software Management window
(Shown as Fig.5-1), change the mode by using password: 168.
Fig.5-1
4.1 Hardware Connection Check
Please make sure the hardware connection correct and software is in i Series Mode
before setting.
5.1.1 Detect Sender Cards
Run software, click the “Control” > “Screen Management” to enter the Screen
Management window, the Sender Mode select “By Sender Card”, Click “Detect Sender
Cards”, the sender cards information will show in the interface, (as shown in Fig.5-2 )
Please check the hardware connection if cannot detect
sende
www.colorlight-led.com Version: V1.0 2015/11/26
