7
DMX Connections
Ø
DMX Cable
：
This fixture can be controlled via DMX using a 3-pin XLR connection. The standard DMX
connection is XLR is: one end connects to the male plug, and the other connects to the
female. As below: pin 1: ground, pin 2:
negative signal, pin 3:
positive signal
Noted
：
In order to avoid failures and interference signal transmission
，
we connect a
resistance120Ω
（
1/4W
）
at
the
end
of
the
DMX
connecting
as
below:
Ø
The Conversion between 3 pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable
