LED Par 64 10mm V2 Manual
www.ColorKeyLED.com
Copyright 2008
4
Stand Alone Modes
Static Color Mode
Press MODE Select button until screen reads
CL0
Press UP or DOWN button to select one of the 7 desired colors:
CL1
Red,
CL2
Green,
CL3
Blue,
CL4
Purple,
CL5
Yellow,
CL6
Cyan,
CL7
White
Color Jump Mode
Press MODE Select button until screen reads
J
.
01
Press UP or DOWN to select the speed from 01-99 (Slow to Fast).
Color Fading Mode
Press MODE Select button until screen reads
F
.
01
Press UP or DOWN to select the fade speed from 01-99 steps (Slow to Fast).
Auto Running Mode
Press MODE Select button until screen reads
A
.
00
The speed can be set via the speed settings of the Color Changing Mode & Color Fading Mode.
Sound Active Mode
Press MODE Select button until screen reads
S
.
01
Press UP or DOWN to adjust the sound sensitivity levels from 01-31 (Low to High).
Master / Slave Modes
Setting up Master and Slave Units
Set the Master unit to either 3 channel or 6 channel DMX mode. Link the units using 3 pin DMX
cable by connecting the DMX out on the master unit to the DMX in on the 1
st
Slave unit.
Continue connecting more Slave units in like fashion by connecting the DMX out on the 1
st
Slave unit to the DMX in on the 2
nd
Slave unit and so on to all of the Slave units in the chain (25
units max on a 20 amp circuit). On each of the Slave units press the MODE Select button until
the display shows
SLA
for slave mode. Now the slave units will follow the function of the
Master unit. (For example, if the Master unit is set to strobe in the purple color macro then all of
the slave units will also strobe in the purple color macro.)
