4
DMX
Settings & Connections
①
Wired DMX Cable Connections
Use the provided DMX to Data cables to connect to the in/out network sockets on the light
for use with a cabled connection.
②
Wireless DMX Connection
Operational instructions:
1. Firstly, ensure that you are outputting signal from your wireless DMX controller
2. Verify light is set to (ULee) in your (SnAL) menu
3. Press the (Menu) button and (Enter) to display the current DMX address. Set as necessary.
4. Reading the Wireless Indicator / Group ID Light:
● Red LED Flash: Sending Signal
● Green LED Flash: Receiving Signal
This unit features seven wireless groups for multiple applications.
Group
Wireless Indicator LED Color
1
Red
2
Green
3
Yellow
4
Blue
5
UV
6
Cyan
7
White
*Receiving unit Group ID must be on the same Group ID as the transceiver i.e. red-red
Note
: 1. Turn off the wireless DMX when using a DMX cable connection.
2. This can be done by accessing (SnAL) in your Menu and changing the setting to (Uire)
.
