background image

 

 

Introduction 

 

Thank you for purchasing the ColorKey Mover Mini Superbeam QUAD 4. Please read these 

instructions carefully before use. Operating  this  fixture  according  to  these  instructions  is 

important to avoid any possible damage or accidents caused by misuse.

 

Packing list 

n

  1x Mover Mini Superbeam QUAD 4 moving head fixture 

n

  1x Bracket 

n

  1x Power cord 

n

  User Manual 

 

Safety

 

 
Caution!

 Opening this unit voids warranty. Contact ColorKey for any service requests.   

Warning!

 To avoid electrical shock, be sure to disconnect power before any service or when 

moving or setting up the fixture. 

Caution!

 Avoid direct eye exposure with the fixture when on. 

                                             

 

 

  This fixture is for indoor use only. 

  This  fixture  must  be  installed  a  minimum  distance  of  5  meters  (16’4”)  away  from  any 

lighted objects. 

  Do not install or operate this fixture near flammable materials.   

  This device must be installed, operated, and maintained by a qualified professional. 

  Do not touch the fixture with bare hands during operation as the surface temperature of 

the fixture can exceed 60˚C (140˚F). Turn off power and wait 15 minutes for the fixture to 

cool before attempting to touch it.   

  Please check if the voltage is in accordance with the rated power before installing. 

  Do  not  operate  this  fixture  if  the  power  cord  has  been  damaged.  Turn  off  fixture  and 

replace with a power cord of similar rating. 

 

Summary of Contents for CKU01-5034










Reviews: