7
DMX Connections
➢
DMX Cable
：
The WaferPar HEX 12 MK II can be controlled via DMX also with RDM function, using a
3-pin XLR connection. The standard DMX connection is XLR is: one end connects to the
male plug, and the other connects to the female. As below: pin 1: ground, pin 2:
negative
signal, pin 3:
positive signal
Noted
：
In order to avoid failures and interference signal transmission
，
we connect a
resistance120Ω
（
1/4W
）
at
the
end
of
the
DMX
connecting
as
below:
➢
The Conversion between 3 pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable
