8
Infrared Remote (IR) Control
To use the IR remote, simply point the remote at the IR receiver on the lighting fixture.
The IR receiver on the AirPar COB QUAD is located to the right of the OLED on the
side panel.
Black Out
Black Out mode instantly turns all LED’s off.
Press the
Black Out
button to engage or disengage Black Out mode.
Addr
Address mode enables you to set the DMX Address of the fixture.
To set up a new DMX address, Press the
Addr
button, then press
(+)
or
(-)
to increase
or decrease the DMX Address Value.
Sound
Sound-Active mode enables the light to respond to ambient sounds in the room using
the fixture’s built-in microphone.
Press the
Sound
button to activate Sound-Active mode. Press
(+)
or
(-)
to increase or
decrease sound sensitivity based on the playback level of the music.
Summary of Contents for AirPar COB QUAD
Page 1: ...SKU CKU 7050 USER MANUAL...
