ColorKey AIRPAD QUAD, User Manual

Page: 11 / 14

11
Setup Examples
Master / Slave
The AirPad QUAD include an integrated W-DMX transceiver for instant wireless
connectivity. This enables the AirPad to wirelessly control any Air Series fixture in the same
wireless group. To achieve this, simply set an AirPad to Master and all other fixtures to
Slave. Turn on wireless on all fixtures and set them to the same wireless group ID.
Master/Slave mode allows you to connect multiple units together using one (1) unit
to control others in a chain. When a fixture is set to ‘Master Mode,’ this unit will
always act as a controlling unit until it is switched out of ‘Master Mode’. The Master
unit will send out signal to Slave units which will react in synchronization. When a
fixture is set into ‘Slave Mode’, this fixture will receive the Master signal.
AirHub DMX
The AirHub DMX ( available separately ) is the central hub used to remotely control all Air
Series fixtures. It is a battery powered wireless DMX transceiver with 16 wireless groups
(00-15) and features built-in presets including static colors, auto, fade, and sound active
mode.
AIRPAD
QUAD
AIRPAD
QUAD
AIRPAD
QUAD
AIRPAD
QUAD
AIRPAD
QUAD
AIRHUB
D M X
ESC DOWN UP ENTER
AIRHUB DMX
AIRPAD
QUAD
AIRHUB
D M X
ESC DOWN UP ENTER
AIRHUB DMX DMX CONTROLLER
AIRPAD
QUAD
AIRPAD
QUAD
AIRPAD
QUAD
AIRPAD
QUAD
AIRPAD
QUAD
AIRHUB
D M X
ESC DOWN UP ENTER
AIRHUB DMX
AIRPAD
QUAD
AIRHUB
D M X
ESC DOWN UP ENTER
AIRHUB DMX DMX CONTROLLER