Page
43
of
46
Vulcan Prime
12. Troubleshooting
Printer Not Initializing
•
Emergency button is pressed
•
Head Power is not ON
•
Servo driver is not powered ON/faulty
•
Main Board is faulty
•
Encoder sensor is not connected to HB
Print Control Center Showing Error
•
USB is disconnected from computer or loosely connected
•
USB Driver is not working
•
USB cable is faulty
Print Not Drying/Ink Marks on Back of the Fabric
•
UV Lamps are not ON or working
Ink Not Filling
•
Main tank is empty
•
Ink pipe is having cut/bend
•
Ink pump is not working/connector loose/open
Print Stops in Between Printing
•
USB cable is loose / faulty
•
Image files are heavy in size
•
Ground wire is disconnected
•
Encoder scale is having ink stains/scratches
•
Ripped file is having error
Print is Shifting wrt Fabric/ Junk Printing
•
Encoder scale is having ink stains (print shows vertical color bands)
•
Encoder sensor is not clean
•
Fibre optic data cable is faulty
Print is Blur
•
No proper calibration viz. bi-direction and step
•
Incorrect resolution is selected
•
Media surface is uneven
Lines in Prints
•
Nozzle blocked in heads (check nozzle test)
•
Incorrect feed step (calibration required)
