Power Limit 3-4 Settings
Set CPU power limit 3-4.
Boot performance Mode
Set the startup performance mode.Options:Max Battery,Max Non-Turbo
Performance,Turbo Performance.
TDP LOCK
Set TDP power limit. Options: Disabledㄋ Enabled.
CPU Ratio
Set CPU ratio.
Memory Configuration Memory overclocking function settings
Memory Profiles memory parameter setting
Set memory timings.Options:Default Profile
AUTO
ㄋCustom Profile
custom ㄋXMP Profile1.
The full name of XMP is Extreme Memory Profile,It is a memory
overclocking mode proposed by Intel, that is, the memory overclocking
frequency and parameters are set in the memory of the SPD module. The
BIOS boot XMP simply reads the overclocking settings parameter from
the SPD and sets the memory frequency. Select "Manual" to set the
memory frequency to overclocking. The following can be used as
reference for ultra memory frequencies:
Memory Frequency
Set memory frequency.
CAS Latency Time (tCL)
This controls the latency of the C A S, which determines the delay time (in
the time cycle) when the SDRAM starts reading after the receive
command.
RAS/ CAS Delay (tRCD)
This project is used to select the time lag between RAS (Row Address
Strobe) and CAS (Column Address Strobe) when reading and writing data
at the same bank. The shorter the set period, the faster the DRAM will
run.
45
BIOS Setting
