background image

2.7.14.Back Panel IO Connector

Use

Used for external CD player, tape player or other audio devices.
This connector for speakers or headphones.

Parts

The standard RJ-45 jack is for connection to single Local Area Network (LAN). 

You can connect a network cable to it

LAN Jack

This connector is for a PS/2 mouse or Keyboard.

PS/2 Mouse or Keyboard Connector

Lie-In(Blue)
Line Out(Green)

Side surround speakers connector

Side R/L(Gray)

Onboard VGA, connect to Monitor

VGA

Onboard HDMI port, connect to HDMI Monitor

HDMI

These connectors are for attaching USB devices such as keyboard, mouse, 

or other USB-compatible devices.

USB Ports

The chapter contains the following:
·Main(System Information)
·Advanced(Advanced BIOS Features)
·Chipset(Chipset Settings)
·Security(Security Settings)
·Boot(Startup Settings)
·OC Drive(OverClock Settings)
Entering BIOS Setup
Power on the computer and the system will start the Power On Self Test (POST)process. When the message below appears on the 
screen, press <DEL> key to enter BIOS:

3.BIOS setup

<Backboard of A320M-M.2 PRO V15/B450M-K PRO V14>

Press F1 to Run Setup
Press F2 to Load default values and continue

Summary of Contents for A320M-M.2 PRO V15













Reviews: