background image

Press F1 to Run Setup

Press F2 to Load default values and continue

Power on the computer and the system will start the Power On Self Test (POST)process. When the message below 
appears on the screen, press <DEL> key to enter BIOS:

Boot device Priority Setting.If user will install operating system, please put“Boot Option #1”set to your CD-ROM or your 
USB device, After setting, press "F10" key to save and exit,System boot from CD-ROM or U disk.

Entering BIOS Setup

Boot Option Priorities(how to install operating system)

This motherboard manual belongs to Colorful Technology and Development CO, LTD. No one is permitted to copy, change, 
or translate without our written permission. 

Copyright

The products name we mentioned in this manual is only for identifying, all of the brands belong to other company.
The registered trademarks of IBM, VGA and PS/2 belong to International Business Machines.
The registered trademarks of Intel, Pentium, Pentium Ⅱ, Celeron, Pentium III and Pentium 4 belong to Intel.
The registered trademark of Athlon belongs to Advanced Micro Devices, Inc.
The registered trademarks of Microsoft, MS-DOS, Windows 95/98/NT, Windows2000/XP etc. belong to Microsoft.
All of the trademarks in this manual have been registered.

Disclaimer

Main

Advanced

Chipset

Boot Configuration
Setup Prompt Timeout
Bootup Numlock State
Quiet Boot

Driver Option Priorities
Boot Option #1

1
On
OFF

→←Select Screen
Up/Down:Choose Item
Enter/ Click: Select
+/-: Change Opt
F1: General Help
F7: Previous Values
F9: Optimized Defaluts
F10: Save&Exit
ESC/Right Click: Exit

3.BIOS setup

4.Copyright Notice

Summary of Contents for A320M-K PRO V14













Reviews: