background image

of the 

IMAGE

PRINT

 manual to learn more about this 

powerful tool.

CHOOSING YOUR INK SET MANUALLY

If  you’re  using  your  own  ICC  profiles  you  will  need  to  select 

the proper ink set from the Printer Settings window. Select your 

proper ink set according to the chart below.

KCMYcm Pigment

(color printing)

Epson printers with pigment/CF/archival inks 

and Ultrachrome printers using Photo Black .

KMCMYcm Pigment

(color printing)

Ultrachrome printers using Matte Black.

K Pigment

Not currently supported.

K Matte Pigment

Not currently supported.

Gray Pigment 

(B & W printing)

Ultrachrome printers using Photo Black.

Gray Matte Pigment 

(B & W printing)

Ultrachrome printers using Matte Black.

KCMYcm Dye

Epson printers using Dye ink.

EPSON ULTRACHROME PRINTERS 

AND THE TINT PICKER

 

IMAGE

PRINT

 

allows you to produce both high-quality color 

and grayscale images using the 7-color Ultrachrome inks 

found standard on the 2200, 7600 and 9600 Epson printers. To 

make best use of this capability the proper profile is essential. 

Most important the profile must match the type of black ink 

- Photo Black or Matte Black that is loaded in your printer. 

This mismatch is the typical culprit in unsatisfactory results. 

Additional sample profiles are provided below to better acquant 

Summary of Contents for 2000/XP












Reviews: