3
4. Installation Procedures
Verify that the stainless steel cold water baffle is
securely in place before placement of water bottle.
•
Remove plastic cap from bottle.
•
If the cold water baffle is removed, water will not be
cooled.
•
Turn the water bottle upside down, filling the
stainless steel tank visible inside of the top of
dispenser.
•
Fill with bottled water only.
Filling with beverages other than water may cause
significant problems to the dispenser.
To prepare your hot water function, press the hot
water button to allow air inside the hot water tank
to escape. Release when water starts to flow.
•
Be sure to complete this step before connecting
the dispenser to the wall outlet.
•
Supplying power to the hot water tank when empty
may cause damage.
The heating and/or refrigerating systems can be
turned on or off by the switches located on the
back of the cooler.
•
If you prefer room temperature water, simply turn
off either the heating or cooling system, and then you
may dispense room temperature water from that
spigot.
Connect the power cord into a grounded 220V
outlet.
•
Allow a minimum of 30 minutes for water heating.
•
Allow a minimum of 45 minutes for water cooling.
