Guide for how to use the cooler
Instruction for using control system
Functions and operations
The cooler has functions: vent, cool, high-middle-low speed switch, swing, pre-cool when cooler
on, timer ON/OFF and water lack protection.
STANDBY STATE
The cooler will be in standby state when power on, with ON/OF icon light and buzzer “Bi” sound.
Note: when power on, the ON/OFF icon will keep light no matter cooler on or off.
ON/OFF
When in standby, press ON/OFF or
, the cooler will run as previous mode and speed before
shutdown. When first power on, the cooler is default to run in cool mode and low speed. The
cooler will run 30s in low speed and then recover to previous running speed before shutdown.
When in running state, press ON/OFF or
, the cooler will enter into standby state. When the
cooler is shutdown in cool mode, it will keep running 10s in vent mode with low speed before
cooler stops.
COOL MODE
When in vent mode, press COOL or
, the cooler will enter into cool mode with vent icon off.
When in cool mode,
will flash for water shortage with 5 buzzer “DiDi” sounds.
will disappear with 1 buzzer “DiDi” sound when water recovers to standard level.
VENT MODE
When in cool mode, press VENT or , the cooler will enter into vent mode with
off.
SPEED SWITCH
Press SPEED or
for speed switch.
SWING FUNCTION
Press SWING or
to start or stop swing function.
